Cookie Img
Back to top
Send SMS Send Inquiry
+917053127046
Our Services
Backed by our rich experience of the industry and by professional team and hard-working workforce, we offer our esteemed clients all types of waterproofing solutions and services. We follow the waterproofing standards which are globally accepted while handling a specific area. In few instances different waterproofing solutions & systems are applicable even in similar area owing to the surface, weather conditions, locations and vibrations. So, our services are conveyed by our experts to match the definite requirements of our valued clients. The basic processes which we follow to render our services for the treatments of varied waterproofing problems are given below:

BASEMENT RAFT WATERPROOFING

In this service, we clean the surface of Plain Cement Concrete (PCC) and get rid of any loosely adhering particles after then, the following sequence of operations in followed:

In this service, we do

  • Laying and proving of PMM admixed with (APE) Acrylic Polymer Emulsion.
  • Applying well-suited primer coat for attachment with substrates.
  • Sealing of all Corners, Joints, Junctions of masonry and pipes with EM/ PMM.
  • Use of waterproofing system. The choice of WP system depends on different aspects like location, layers, category of WC, etc.
  • Treatment protection with CMP developed with IWC between 4% and 2% by cement weight.
  • Providing and fitting needed dia MS/GI/PVC nozzles inserted about the half of the member depth to be filled in the pattern of grid at spacing of around 1.0 mtr C/c while raft slab casting. (The caps should be fitted in the nozzles mouth to prevent chocking at the time of concreting or nozzle could also be fitted after concreting)
  • Injection of grouting compound with cement nature slurry admixed into the nozzles with the help of grouting pump.
  • 28 days after casing of concrete the slab/raft reaches the complete strength and then the operation grouting is done.
  • The nozzles are sealed off with rapid setting compound of sealing or PMM after removing of the nozzles projected over the surface of concrete

RETAINING WALL WATERPROOFING

In this service, we scrub and clean the surface with water wash and wire brush to remove the loose debris such as gaps, exposing of cracks, holes, pits, etc., (if any) from the surface, afterward. We follow the given below sequence of operations:

  • Chipping/cutting of CJ in groove of U shape of around 20mm deep x 20mm wide and area surrounding the closing of tie holes around 50mm x 50mm x 25 utilizing tools for chipping and then filling the same with PMM after the application of slurry coat.
  • Injection grouting from the inside of the wall in patterns of grid at a distance of 1.0mtr C/c at CJ and 1.5 mtr C/c on further areas.
  • Surface fuse coating after thoroughly smoothing, cleaning, etc. finished in all details.
  • Use of WP waterproofing system. The system is selected on the basis of different parameters like layers, category of WC, location, and more.
  • Applying plaster of CM protection to prevent damages to thoroughly applied system of waterproofing from works of landscaping

BASEMENT DECK/ PODIUM AREA/ NON-TOWER WATERPROOFING

In this service, we scrub and clean the slab of RCC with water wash and wire brush to loose debris such as gaps, exposing of cracks, holes, pits, etc., (if any) from the surface, afterward. We follow the given below sequence of operations:

  • Performing treatment of waterproofing by non-shrink expanding cement like pressure process of grouting along the joints of construction with needed diameter PVC/MS/GI nozzles of minimal 25mm deep at 0.75 C/c along the joints of construction.
  • Injection of cement slurry of varied viscosity by pressure of grouting by pump utilizing non-shrink grout combined with cement slurry neat.
  • Nozzles sealing after the operation of injection with fast setting non-shrink compound of polymer.
  • Repairing and removing of imperfections of surface like cracks, protrusions, loose and structurally unsound concrete utilizing PMM.
  • Filling and sealing of all joints of pipe with PMM or epoxy mortar.
  • Preparing a fillet of 50x50mm at the vertical and horizontal junction utilizing CM admixed with APE (acrylic polymer emulsion)
  • Applying and providing Elastomeric WP (Waterproofing System) over the washed, dried, grease and oil free surface with roller/brush. Application of SRBWC and REWC with the fiber mesh of reinforcement glass between the coats to offer extra strength to the system of waterproofing. Final coating of waterproof acrylic polymer to perform as a binder with cement nature mortar. Application of all the layers should be in perpendicular direction to one another. This system of waterproofing should be executed up to finish level of deck.
  • Protection CC screed with M15 G of minimal 50mm thickness is laid in needed slope after geotextile non-woven fabric is laid over the layer of waterproofing.
  • Laying and providing optimum strength polypropylene modular cells of drain having needed strength of compression for subsurface drainage involving laying and providing of non-woven needle punched polyester GFC on top of drain cell.

SWIMMING POOL WATERPROOFING

In this service, we use wire brush to clean the surface and get rid of loose material/ debris/ laitance from the surface involving gaps, holes, pits, exposing of cracks, etc. (if any) afterward, we follow the given below steps:

  • Injection grouting is provided at the joints of construction with cement slurry improved with grouting non-shrink compound, dosage according of recommendation or requirement.
  • Preparation of corners/ joints and sealing of junctions of pipe with Epoxy mortar/ PMM/Polyurethane Sealants.
  • Application of bond coat of polymer coating based in SBR after saturation of the surface with curing of water
  • Applying and providing optimally flexible polymer based in acrylic for waterproofing without or with FGC. The layers are ascertained according to the recommendation or requirement.
  • Treatment protection with IWC enriched with CMP in accordance with IS: 2645 involving curing.

PLANTER WATERPROOFING

In this service, we scrub and clean the surface with water wash and wire brush to remove loose debris from the surface including gaps, exposing of cracks, holes, pits, etc. (if any) after the horizontal and vertical opening of brick grooves (for post WP) after then, we follow the given below operations:

  • PMM building/ filling up of grooves after slurry coat of polymer based in SBR.
  • Well-matched coating of primer on surface after surface smoothing.
  • Optimally flexible coatings of polymer that can waterproof with FG for monolithic structure and interlocking.
  • Treatment protection with CMP & CC screed admixed of minimum 50mm thickness admixed with IWC.
  • Planter soil filling as per requirement over after laying and providing of Stone aggregate/ Nano drain combined with the media of GFC separation.

LIFT PITS WATERPROOFING

In this service, we scrub and clean the surface with water wash and wire brush to get rid of unattached debris from the surface including gaps, exposing of cracks, pits, holes, and more (if any) after then, we follow the given process:
  • Surface injection grouting at a distance at 1.0 Mtr C/c with polyurethane/CS grouting.
  • Building up/ filling up the gaps, cracks, pits, holes etc., with EM/PMM.
  • Primer coating capable of deep impregnation for substrates bonding.
  • Waterproofing system application. Different aspects like category of WC, locations, layers, etc., are considered while the selection of WP.
  • Treatment protection with CMP enhanced with IWC.

WATER TANK WATERPROOFING (UG/OH)

In this service, we scrub and clean the surface with wire brush to get rid of unwanted materials from the surface including gaps, exposing of cracks, holes, pits, crevices etc. (if any) after then, we adopt the given below process:

  • U shaped Chipping/ cutting of grooves at the CJ and BCJ and grooves filling with compound of flexible polymer.
  • Injection grouting from the inner side of the wall in a pattern of grid at a distance at 1.0Mtr C/c at CJ and 1.5 Mtr C/c on another area.
  • Well-suited coating of primer on the surface which is perfectly vapor porous after overall surface preparation.
  • Application of waterproof membranous completely flexible coating on overall areas treated with primer.
  • Treatment protection with Tiles/CMP or coating of food grade.

TOILETS & KITCHEN WATERPROOFING

In this service, we scrub and clean the surface with water wash and wire brush to get rid of movable fragments from the surface including gaps, exposing of cracks, pits, holes etc. (if any) after then, we adopt the given below process:

  • Vertical and horizontal opening of brick (for application after waterproofing).
  • Filling and sealing of all joints of corner, junction of pipe with flexible polymeric EM/compound.
  • Building up/ filling of grooves with PMM after a SBR based polymer coat.
  • After smoothing the surface, a compatible coat of primer.
  • Application of flexible waterproof acrylic based coating of polymer.
  • Treatment protection with IWC enriched in CMP in accordance with the IS:2645.
  • Light weight concrete/ khangar filling up to needed level of surface.

TERRACE WATERPROOFING

In this service, we scrub and clean the surface with water wash and wire brush to remove loose debris from the gaps, exposing of cracks, holes, pits, etc. (if any) of the surface. After then, we follow the given below sequence of operations:

  • Building up/ filling up the cracks, pits, gaps, holes, etc., with polymeric compound of flexible nature.
  • Deep impregnation suitable coating of primer for substrates bonding.
  • Waterproofing system application. Different aspects such as category of WC, locations, layers, etc., are considered after proper examination of site.
  • Treatment protection with CMP/CC screed of minimal 50mm thickness to safeguard from mechanical damages.

TERRACE GARDEN WATERPROOFING

In this service, we clean the surface with water jet wash and wire brush to remove loose material/ debris/ laitance from the surface. Before fitting of waterproofing system, we make sure that the surface is now perfectly ready to be given the system and it is removed from any contaminants like fungus, dust, algae, etc. After then, we follow the given below sequence of operations:

  • Giving injection grouting at the joints of construction with expanding non-shrink cement Epoxy/Slurry system of injection resin.
  • Filling the cracks of surface with PMM after U shaped chipping/cutting of groove by utilizing tools for chipping and also the live cracks are sealed with PU sealant (in any).
  • Application of waterproof and highly flexible membranous coating on the overall surface including wall of parapet without or with FGC.
  • Laying and providing CC screed protection of M25 G of minimal 50mm thickness in necessary slope over waterproofing system which is well applied.
  • Applying coating which prevents biological growth over cured surface of concrete.
  • Making watta/gola at every joints of corner with IWC enriched in CM after the application of a slurry coat.
  • Laying and providing drain cell with geotextile non-woven cloth.
  • Garden soil filling up to needed level.

This waterproofing practice is appropriate for those concrete terraces which are particularly designed for terrace gardens.

MS SHED/ ASBESTOS WATERPROOFING

In this service, we scrub and clean the surface after repairing and removing of broken sheets, old waterproofing membrane, or any other external materials (if any) before the installation of waterproofing systems. After that, we perform the following sequence of operations:

  • Special treatment of overlapping joints.
  • Well-suited coating of primer on the surface after repairing of holes, cracks, etc. (if any).
  • Heat reflective cum waterproof coatings with FGC. The selection of waterproofing systems depend on different aspects like category of WC, locations, layers, and more, after the proper examination of site.

POLYESTER MONOLITHIC GLASS MESH WATERPROOF LINING (FOR MS GUTTER ETC.)

In this service, we scrub and clean the metal surface after the removal of tarfelts (if any) before the installation of waterproofing systems. After this, we perform the following sequence of operations:

  • Applying de-rusting agents coats.
  • Repairing of cracks, holes, joints, etc. with polyester  or epoxy resin and unsaturated glass mesh.
  • Laying glass mesh of definite GSM infused with the combination of reactive chemicals.
  • Surface hard coat with polyester chemical mixed with carefully chosen pigment

CANOPY

In this service, we clean and scrub the surface after removing the debris (if any) before the installation of WP (waterproofing systems). After that, we follow the given below sequence of operations:

  • Water washing of the surface with application of brush to attain moist and clean surface.
  • Coating the surface with primer of vapor permeable soft set crystalline polymeric compound.
  • Repairing and filling of holes, cracks, joints, crevices, etc. with optimum strength vapor permeable flexible crystalline mortar paste after the application of a waterproof elastomeric coating.
  • Application of non-shirk HGMP filler based compound coating for the forming of permanent film.
  • Crosswise impregnation of the FGC with the polymeric compound of HGMP.
  • Making watta/gola chemical bond at all the joints of corner.
  • CMP Chemical bond in slope for fast water discharge and protection.


EXPANSION JOINT TREATMENT

In this service, we scrub and clean the surface of EJ mouth with wire brush to remove loose debris from surface. After this, we followed the given below process:

  • Preparation of surface and edge of EJ mouth with ready to use/PMM repair mortar, in the case of any un-proper gap and damages.
  • Application of epoxy bonding adhesive after the application of masking tape.
  • Fixing and providing waterproof flexible tape.
  • Application of an extra layer of adhesive for tape interlocking.
  • PMM/CM of needed thickness to be laid to safeguard from abrasion after overlapping joints sealing.
  • Protecting entire system of expansion joint with plate of needed size which is appropriate for contraction and expansion. (Plate selection is relied on varied aspects like thickness, locations, colors.

Added information on the specifications of work in details and rates for your sites of any of the treatment mentioned above can be acquired only after physical inspections of your actual site only by our experts.


MOST POPULAR SERVICES
Toilet Waterproofing
Terrace Waterproofing
Waterproofing Services
Cementitious Waterproofing Services